The inline Thermostat that I bought from you was a life saver at a wonderful price. And the other point is that this product will keep on saving all through the winter. Instead of the heater running all of the time it cycles the was any heater should keeping a constant at all times. Thank you very much. C. Shotwell
FREE SHIPPING
30-DAY MONEYBACK GUARANTEE
*selected heaters only
Description
Economical - Budget price
Replaces virtually any two wire (T410A) or four wire (T410B) line voltage wall mounted electric heating thermostat
Easy to install; 6 in. (150 mm) color-coded leads
Rugged, plastic mounting base and one piece cover with vents
Ideally suited to new construction applications
Specifications Application: Electric baseboard heat; convectors and fan forced heaters (resistive rated loads)
Mounting: Vertical
Color: White
Stages: 1 Heat
Electrical Connections: 6 in. (150 mm) copper leadwires, suitable for connecting to aluminum wiring if approved CO/ALR solderless connectors are used.
Switching Action: SPST
Dimensions: 4 1/2" x 2 3/4" x 2 1/4" - 115mm x 70mm x 57 mm Setting Temperature Range (F:) 40 F to 80 F
Differential Temperature (F): 3 F,(C): 2 C
Electrical Ratings: Noninductive Resistive 22A at 120V (2,500 Watts) / 208V (4,000 Watts) / 240V (5,000 Watts) 19A at 277V (5,000 Watts)
Frequency: 60 Hz
Sensor Element: Bimetal
Approvals, Underwriters Laboratories Inc Listed; File No. E47434, Guide No. XAPX - Canadian Standards Association Listed: File No. LR1322
Voltage: 120 / 208 / 240 / 277 VAC
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
BUY ENVI NOWWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
BUY ENVI NOW"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
BUY ENVI NOW
Download this envi PDF Guide for free!
