Envi 220v Hardwired Electric Panel Wall Heater - 500 Watts - 3rd Gen (LE5022D)

(33 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

33 Reviews Hide Reviews Show Reviews

  • 5
    Environment wall mounted heater 220v hardwired

    Only had them installed a few days ago buy an electrician.Already can tell they will be loved. Everything just as advertised. Clean, quiet, efficient heat. Already thinking about getting more for other rooms.

    Vicki Hawse posted on 28th Aug 2022

  • 5
    Silent and Efficient

    This is the first convention type wall heater we’ve ever used. Before we installed is we had some apprehension it would provide sufficient heat and/or make the wall too hot immediately above it as there is no fan to force heated air out into the room. After using it now for a month in an approximate 200 sq ft otherwise ingested room, we love it. It’s silent and easily maintains a comfortable temp. The wall above it gets warm but nothing to worry about at all. We love it.

    Loren Richardson posted on 12th May 2022

  • 5
    220 v Envi Heater w/thermostat

    Well packaged and arrived promptly. Looking forward to using this newer version. I have already three in our northern home. Love the quiteness of these units and they are very energy efficient. Good install instructions and safe to use.

    John Scarsi posted on 1st Apr 2022

  • 5
    ENVI 220V

    Very good style and exceptional heating. I've purchased 6 for my house and cabins.

    William J Gray posted on 31st Mar 2022

  • 5
    ENVI 220V HARDWIRED HEATER.

    WORKS GREAT. VERY ECONOMICAL. LOVE THEM. I HAVE A TOTAL OF FOUR NOW.

    TOM NEWMAN posted on 17th Mar 2022

  • 5
    Wall heater

    absolutely love this heater

    Charlotte Davenport posted on 9th Mar 2022

  • 5
    Slim, efficient, and easy to install!

    I bought this heater because my house is almost 200 years old and the bedrooms on the third floor do not have radiators or any other type of heat (I live in New England and it gets cold in the winter). I plugged it into a programmable thermostat and ever since it has kept my bedroom at an even temperature. I also have difficulty in the house with blowing breakers in the winter due to space heaters drawing too much power. The efficiency of this unit has cut down on the breakers blowing and I have already bought an additional heater for the other bedroom on the third floor and I plan to replace other space heaters in the house with these units. The design is excellent, it is cool to the touch, and was so easy to install. Great product. Highly recommend.

    Alexa - Ecstatic customer! posted on 18th Nov 2021

  • 5
    A fantastic product

    I installed these heaters in two bedrooms and am thrilled with how well they work. Silent and unobtrusive, they are very efficient at keeping the rooms at a comfortable temperature. I highly recommend this product.

    Andrew G posted on 18th Nov 2021

  • 5
    O yeah

    I've had this heater for 2 weeks now and I love. I have 150 square foot bedroom. It's more than enough!

    Brett posted on 18th Nov 2021

$179.95
made in USA
Shipping:
Free Shipping
UPC:
860003321355
Availability:
In stock (Shipping Same Business Day)
Weight:
15.00 LBS
Shipping:
Calculated at Checkout
CutSheet:
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage:
500 Watts
Size:
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight:
10 lbs (shipped weight 15lbs)
Color:
Luxury White
Thermostat:
Manual
Cordset:
Hardwired
Voltage:
220V
Ampere:
2.27 Amps
Adding to cart… The item has been added
Availability:
In stock (Shipping Same Business Day)
  • pro-icon-1 FREE SHIPPING
  • pro-icon-2 30-DAY MONEYBACK GUARANTEE
  • pro-icon-3
    3-YEAR WARRANTY*

    *selected heaters only

Description

IN STOCK!

Introducing the brand new 3rd Generation Envi heater! The LE5022D is a direct replacement to the HW3022T & HW1022T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5022D Envi Heater is a 220volt hardwired whole room heater and has a built in thermostat.

FEATURES OF ENVI HEATER MODELS:

  • True Temperature-Controlling Thermostat. (Only models LE5012PLE5012DLE5022D)
  • Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
  • 500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
  • Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
  • Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
  • Conforms to UL & CSA (Canadian) safety standards (All models).
  • Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design.  Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater.  This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater.  The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

  • Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
  • Efficient - 100% Pure Convection Heating
  • Innovative - New Patented Stack Convection Technology
  • Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
  • Simple to install  - Installs in minutes, no drilling required
  • Slim - Just 2 inches thin
  • Stylish – Beautiful flowing curves compliment any room interior
  • Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
  • Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
  • American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
  • Heats Room Size – 130 to 150 square feet
  • Built in Thermostat - Better temperature control
  • Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
  • Industry Leading Warranty – 3 years
  • Easy to clean – smooth wipe clean surface
  • Cord Storage - Cordset can be stored inside the heater for a more attractive look.
  • Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.

Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.

*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.

Specifications

  • Brand

    eheat, Inc.
  • SKU

    LE5022D
  • ShortDescription

    The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
  • CutSheet

    https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
  • Wattage

    500 Watts
  • Size

    19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
  • Weight

    10 lbs (shipped weight 15lbs)
  • Color

    Luxury White
  • Thermostat

    Manual
  • Cordset

    Hardwired
  • Voltage

    220V
  • Ampere

    2.27 Amps
CLICK HERE FOR SPEC SHEET
it-wotk-img

How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!

BUY ENVI NOW

See How Easy the Envi Wall Mounted Panel Heater is to Install Yourself

Worried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.

BUY ENVI NOW
7

Get Yours Today and Join

300,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."

left-img-ready

World's Number One Wall Mounted Panel Heater

Get yours today and join the 300,000+ Satisfied Customers

BUY ENVI NOW
  • logo-1
  • logo-2
  • logo-3
  • logo-4
  • logo-5
pdf-img Download this envi PDF Guide for free!