Loading... Please wait...
  • My Account
  • Order Status
  • Wish Lists
  • Gift Certificates

eheat Canada eheat, Inc. on Facebook

Our Newsletter

Installation Instructions

The envi installs on the wall with a simple three-step process. No drill. No hassle. Just heat.


  1. After marking the desired placement of the envi heater, screw in the Wall Claw Anchors.
  2. Next, screw the envi wall hook into place within the anchor.
  3. Hang envi heating unit securely onto the wall mounted hooks.


THIS HEATER WILL NOT TURN ON UNLESS MOUNTED ON A WALL (Please read more on page 6 of our owner's manual about our unique safety featureThe number one trouble shooting tip is to check that the internal, electrical safety switch (Wall-SensTM) is being engaged. The heater WILL NOT OPERATE AT ALL if this switch is not engaged. This problem occurs when the right hand side of the heater is not pushed down far enough between the gap between the wall and the mounting clip. The mounting clip can become squished if it is screwed in too hard. Uneven walls can also cause the same mounting/wall switch problems.

For detailed installation instructions please see the envi owner's manual or our envi installation video:

Our Newsletter