Application This thermostat can be used to control an electric heating system such as electric baseboard heaters, electric radiant ceiling heaters, electric convectors and electric fan-forced heaters.
Mounting: Vertical
Color: White
Power Method: Hardwired
Electrical Connections: 6.0" (150mm) tinned copper lead wires
Switch Positions (System): C/F
Switch Type & Switching Action: TRIAC - SPST (Single Pole-Single Throw) - Perfect for Silent Switching
Cycle Time: 15 Seconds for non-fan-forced heaters / 5 minutes for fan-forced heaters
Accuracy: 0.27-0.9 F / 0.15-0.5 C (15 sec / 5 min cycles)
Dimensions: 5.0" X 3.3" X 1.2" / 127 mm x 85 mm x 30 mm
Temperature Setting Range: 40-85 F / 5-30 C
Electrical Ratings (min): Minimum Load: 0.83 Amps (resistive only) 200 watts @ 240/60 VAC, 100 watts @ 120/60 VAC
Electrical Ratings (max): Maximum Load: 10.4 Amps (resistive only) 2500 watts @ 240/60 VAC, 1250 watts @ 120/60 VAC
Sensor Element: Thermistor
Ambient Temperature Range: 32 F to 122 F / 0 C to 50 C
Comments: Backlit, On-screen heating power indicator. Minimum & Maximum temperature locks. Battery-free. Not to be used on central heating systems or systems that have an inductive load, such as boilers or forced-air furnaces.
Posted by Bruce on 13th Oct 2020
Makes the heater super effective
I hardwired one of these into my RV and it is fantastic because the thermostat allows the heater to just barely come on. It also remembers what the temperature was the last time you were plugged in at an RV site or with the generator.
Posted by Kurt M on 24th May 2020
I have installed this non programmable thermostat in each living space; paired with a hardwired Envy heater. It creates zone heating. The heat setting is maintained making the room temperature consistent. No high and low spikes, just even heat. The operation range, low and high set points, current temperature display, backlighting and the little heat wave display make this non programmable thermostat an easy choice over the basic on/off thermostat for just a few more dollars.
Posted by David on 13th Oct 2019
It is hard to find a thermostat that will work on old school wiring this one will, it does work well when installed it was questionable when I first hooked it up it was glitchy, before I had it installed on the wall but two weeks now and no complaints for the mo yes you can’t go wrong
Posted by Unknown on 6th Feb 2013
Replaced a mechanical dial type for my forced fan electric wall heater in the bathroom. I really like being able to see the ambient temperature of the room. Was easy to wire. Absolutely silent operation.
TOP TEN REASONS TO BUY:
| ||
100% Money Back Guarantee! At eHeat, we offer a 100% Purchase Price Refund for 30 days - no questions asked! If promotional free shipping was offered at the time of your order, the actual shipping cost will be deducted from the refund.* *Visit our return policy here. | ||
FREE
| ||
American Built!*
eheat.com is proud to support American industry by offering to our customers, the envi heater which is made, right here, in the USA. *see details ![]() | ||