The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 7 years we have finally refreshed the envi Heater with a more stylish look.
Our split level house has always been difficult to heat because of the thermostat location. Our kitchen/family room was always chilly. This room measures 22' by 16' and the installation of two eheat panel wall heaters has been most effective. A nice constant background heat.
We are very pleased with the efficiency and high quality of this heater. It’s attractive simple design is very unobtrusive. We bought the eheat 120 v plug in version for our 10x10 porch which we recently had enclosed. We installed it ourselves and found the directions and videos to be very helpful. It is working wonderfully so far- so quiet and it heats the space to a cozy level even with outside temperatures are in the single digits!
I was looking for a heater for our breezeway that would be safe around my two granddaughters and two Newfoundlands. This heater fits the need completely. It keeps the room very comfortable at less than 50% of the thermostat setting and remains cool to the touch. Very easy install. I couldn’t be more pleased.
On a recommendation from another user, I installed the envi heater in my bedroom. It not only heated the bedroom, but also the adjoining bathroom. As the heat source is electric, I was able to turn off the electric heat thermostat and heat exclusively with the envi heater.
Too easy to install. Watch the video. Plug in and enjoy.
My second purchase of the same item. Works very well, good heat distribution, low profile, quiet and heats the room fast. Installation was relatively easy first time, second time was much faster. Recommended to my sister for her bedroom.
We installed these panel heaters in our previous home, and when we moved we decided that the new basement bathroom really need some supplemental heat. We keep this set at the "3" setting 24/7, and that little room is now nice and toasty at all times. An added benefit is that there is a towel rack on the wall above it, and the towels are now warm, too! Such a simple, and inexpensive solution!
Would absolutely recommend. Easy to install, and works perfectly.
I live in a loft and was concerned my bedroom ceiling was too high. It does get warmer up higher, but then it warms the whole room and it seems to even warm the whole apartment if I leave the door open because I haven't needed to run the main heater nearly as much! Never gets too hot and so quiet! Just bought a second one!
FREE SHIPPING
30-DAY MONEYBACK GUARANTEE
*selected heaters only
Description
SHIPPING MAY BE DELAYED DURING PEAK SEASON (Orders will ship on a first come first serve basis)
Introducing the brand new 3rd Generation Envi plug-in heater! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls and is all round better heater. The LE5012P Envi Heater is a 120volt plug-in whole room heater and has a built in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
BUY ENVI NOWWorried about paying to get a contractor to install your new Smart Envi unit? Think again. Jason Cameron explains how the Smart Envi is designed to be installed and set up at home by yourself in just XX minutes.
BUY ENVI NOW
"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 200,000+ Satisfied Customers
BUY ENVI NOW
Download this envi PDF Guide for free!
