Loading... Please wait...
- Home
- Wall Mounted Electric Panel Heaters
- Envi High-Efficiency Whole Room 120v Hardwired Electric Panel Wall Heater - 2nd Generation (HW3012T)
- Home
- Wall Mounted Electric Panel Heaters
- Hardwired
- Envi High-Efficiency Whole Room 120v Hardwired Electric Panel Wall Heater - 2nd Generation (HW3012T)
Envi High-Efficiency Whole Room 120v Hardwired Electric Panel Wall Heater - 2nd Generation (HW3012T)
more info 
Product Description
FREE SHIPPING!
The HW3012T is a direct replacement to the HW1012T model. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 7 years we have finally refreshed the Envi Heater with a more stylish look. The HW3012T Envi Heater is a 120volt hardwired whole room heater and has a built in thermostat.
FEATURES OF ENVI HEATER MODELS:
- True Temperature-Controlling Thermostat. (Only models HH3012T, HW3012T and HW3022T)
- Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
- 475/500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
- Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
- Hardwired models are approved for commercial installation. (HW3012T/HW3022T - with built in thermostat and HW3012N/HW3022N - without thermostat)
- Conforms to UL & CSA (Canadian) safety standards (All models).
- Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
- Economical - low wattage technology (only 475/500 watts). Costs as little as 4-5 cents an hour to run.
- Efficient - 100% Pure Convection Heating
- Innovative - New Patented Stack Convection Technology
- Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
- Simple to install - Installs in minutes, no drilling required
- Slim - Just 2 inches thin
- Stylish – Beautiful flowing curves compliment any room interior
- Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
- Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
- American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
- Heats Room Size – 130 to 150 square feet
- Built in Thermostat - Better temperature control
- Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
- Industry Leading Warranty – 3 years
- Easy to clean – smooth wipe clean surface
- Cord Storage - Cordset can be stored inside the heater for a more attractive look.
- Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models HW3012T, HW3012N, HW3022T and HW3012N)
Please review our Return Policy before placing an order.
Specifications:
| Model Number: | HW3012T |
| Voltage Rating: | 120V, 4.17 Amps |
| Power Consumption: | 475/500 Watts |
| Unit Size: | 19.3 in. (W) x 2 in. (D) x 22.2 in. (H) |
| Unit Weight: | 10 lbs (shipped weight 15lbs) |
| Color: | Luxury White |
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship within 1-3 business days.
Product Reviews
Showing reviews 1-20 of 42 | Next
-
Efficient and effective
Posted by Erik Zimmerman on 13th Sep 2020
I installed my Envi heater yesterday, but I had a good experience buying one for our previous home's basement. This one we installed in our three-season porch. I'm optimistic I can get another month or two of use out of that space in both spring and fall. It seems to be working well so far!
-
Need to wait for winter season for a trur test.
Posted by LJW on 11th Sep 2020
Works fine upon installation. Quiet performance. December will be the true test.
-
Straighten out those cold spots
Posted by ray on 10th Sep 2020
During the time COVID-19 Shelter in place was going on I found that working in the dining room in the morning was rough. It was colder than the rest of the house. I installed your product by myself just two wall hangers and a grounded plug for the wall socket. It's a big improvement. I can walk into the room and feel comfortable enough to get to work.
-
Very subtle and pleasant heat
Posted by Michael on 27th Jun 2020
For my purpose , namely heating up a small space ( bathroom) this is a perfect heater. Extremely quiet and efficient. In a few minutes the space reaches the ideal temperature. It’s subtle and barely noticeable.
-
Satisfied
Posted by Rick Fulp on 19th Jun 2020
Your product is very stylish and efficient. I've purchased two of these for our rental house.
-
Streamlined appearance
Posted by Neil R. on 1st May 2020
This product is functional, attractive and silent. Two criteria for my purchase. Be aware that it only produces 500 watts of heat when sizing for your needs
Very nice product. I bought 3 of them
-
Easy to install, cranks heat!
Posted by John S. on 27th Apr 2020
After a slight delay in receiving the heater set up with no problems. This is the second heater that I have purchased from them in last two months. Have both the plug in and hardwired versions. Very easy to install, comes with an integrated mounting template. Really produces a lot of heat, only takes a few minutes to set up. Highly recommended
-
Efficient, good looking heater.
Posted by Chris on 24th Feb 2020
This is my second ENVI heater. Both times I have installed the hard wired unit. Easy to install, assuming there is wiring in the wall. We have installed the unit in our laundry room, which is about 60 sq ft. The unit really generates a good amount of heat.The second unit I installed has a small deflector at the top to keep heat from going up the wall. While an improvement from the non-deflector unit, a significant amount of heat does still go up the wall and it gets pretty hot to the touch. I have come up with my own deflector that I put on the top of the unit. Mine does a good job of keeping heat off the wall and sends heat into the room. I wish ENVI would develop a larger snap-on deflector than what is currently there. It would turn a good product into an outstanding one.
-
Excellent Heater
Posted by Amy Pike on 21st Feb 2020
Bought this heater for my new laundry room/half bath. The room is still mid construction and has no insulation. We put the heater up early, because the temps outside have been in the low 20s. It has done a wonderful job keeping us warm. I know that once we get the insulation in and sheet-rock up, the heater will be more than sufficient.
I will be buying more for other rooms in my home.
-
Just what I needed!
Posted by Louis on 6th Feb 2020
My spouse has been complaining about the in the air for one room for years. We tried those small heaters with fans. They were way too noisy making it difficult to hear the "all Important TV."
So when I came across the "Envi High-Efficiency Whole Room 120v Hardwired Electric Panel Wall Heater - 2nd Generation (HW3012T)" install on a recent This Old House video I was all over it.
The install was made very easy for instructions and the provided mounting template got the job done without the need for an electrician. Yes that's a DYI for sure.
We have had the unit running almost every evening and it works great. Very pleased. I am just sorry I did not get 2 units during the January special.
-
Sleek-Efficient Heater
Posted by Janelle on 29th Jan 2020
My nightmare is over, the Envi heater is my savior. We had a laundry room that was dramatically colder than the rest of the house even though we have central heating. I now enjoy going into my laundry room to do the laundry. The unit was easy to install. I love that the unit is not hot to the touch, sleek looking and does its job very well.
I wish I could attach a photo.
-
Good supplemental heat
Posted by Joe on 28th Jan 2020
I purchased this heater for a small half-bath (about 30 sq ft) without other heat that is always a bit chilly. It is attractive and very slim on the wall - since I have such a small space, this was my #1 reason for selecting this heater over other brands. As advertised, the case never gets hot & it seems quite safe. The room air (and toilet seat!) are warmer now, though the floor is better but remains a bit chilly. In fairness, though, the room is above an unheated (but encapsulated) crawlspace and it's somewhat unreasonable to expect a passive convection heater like this to warm the floor fully.
It was a little bit tricky to mount & one of the plastic anchors snapped when screwing in to my tough plaster wall - the manufacturer could consider switching to metal anchors to improve the installation experience in materials other than thin modern drywall.
I just got my first electric bill since the installation and running the heater for about 20 days used around 150 kWh, adding about $30 to my bill with the heater set at about 40% on the dial. This is roughly in line with the Envi marketing specifications (in my case, about 6 cents/hour) but I am hoping to get away with lowering the dial further and still keeping the space acceptably warm.
My 4 star choice is a bit harsh, I would give 4.5 stars if that were an option.
-
looks and works great
Posted by Tony DiVanna on 27th Jan 2020
We have small upstairs bathroom that was always just a little bit cold in the winter. We installed this (which was super easy) just as a supplement so we just run it on a low setting. It looks really great and the room is comfortable now. I'm thinking of getting another one for our bonus room above the garage.
-
Great heater
Posted by Craig Bittingef on 26th Jan 2020
I installed two of these heaters in a 900 square foot room and they are doing great No complaints. Very easy to install with the template they provide you. I would recommend Envi heaters to anyone that wants an electric heater.
-
Perfect Gental Heat
Posted by Willard on 25th Jan 2020
We needed to heat a small guest bathroom that had no other heat source. The heater takes up just a small space, is safe to stand close to because it’s not hot to touch and gives such a comfortable heat. We also were able to get all our questions answered by online chat before we completed our purchase. We’re extremely happy with this heater!
-
quiet, looks good.
Posted by Jane Murphy on 20th Jan 2020
I had a powder room and a dressing area of a master suite that needed supplemental heat. These units are good looking, quiet and do a great job for heat. I am most pleased with the purchases.
-
All that I hoped for.
Posted by Mitch on 26th Dec 2019
I installed one in a 150sqf. room and it is such even heat. Looks great and we gained back the space the old portable heater was taking up.
-
Eheat, room heater
Posted by Ed on 20th Dec 2019
I purchased this to supplement the HVAC heat for our front porch where my wife has her desk working from home. We've had it on since I installed it and we are very pleased with it. It takes the edge off in the room. It was very easy to install.
-
Good product
Posted by jrs on 15th Dec 2019
Easy to install, easy to operate, works as advertised.
-
Great looking heater
Posted by Mark lawrence on 6th Dec 2019
It took a while to get , but, was worth the wait. When I first opened the box I was impressed, part of the packaging was a template to mark the mounting holes. Wiring and installation couldn’t have been simpler. I turned it on and was very happy with the silence and the heat output. I will buy again, great product!
Showing reviews 1-20 of 42 | Next
Product Videos
-
Envi Heater: T...Jason Cameron explains why the Envi Heater is the easiest heat...
Product Videos
Customers Who Viewed This Product Also Viewed
Find Similar Products by Category
TOP TEN REASONS TO BUY:
| ||
Shop with Confidence!As a BBB Accredited Business, eHeat supports the BBB's services to the public and meets all BBB accreditation standards. After 9 years in business, eheat, Inc. is proud to have earned the highest BBB rating available (A+) | ||
|
100% Money Back Guarantee! At eHeat, we offer a 100% Purchase Price Refund for 30 days - no questions asked! If promotional free shipping was offered at the time of your order, the actual shipping cost will be deducted from the refund.* *Visit our return policy here. | ||
|
FREE
| ||
|
American Built!*
eheat.com is proud to support American industry by offering to our customers, the envi heater which is made, right here, in the USA. *see details 
| ||
