Heater
These heaters work amazingly well and are esthetically appealing
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
These heaters work amazingly well and are esthetically appealing
Easy to install (if you read the instructions first!) and use.
This was a good match for our bathroom, keeps it warm on very cold days and when it’s not quite as cold we leave the door open to heat a laundry / utility entry area. It was easy to install and the instructions were straightforward.
Perfect low energy solution to my cold entry foyer. The low profile, safe to touch design made this an easy choice. I'm a builder and I've been buying both the hard wired and plug in models for my clients for years.
We have 4 of these installed in a 600 sq ft addition and they performed well during a storm at minus 37 degree F with a wind.
We purchased 3 of these for a former home several years ago and were very pleased wth the look, reliability and efficiency. Fast forward several years, when we needed a new heater for a large bedroom (13'x20'). The install was simple. We broke in the unit as described in the handbook. It heats the entire room comfortably on the lowest setting. Love the Envi!!!
Simply put this heater rocks. Easy installation and looks great. It is currently -28° Celsius out and it has the capacity to heat a room 10’ by 14’ with no problems at all. Would highly recommend to anyone.
installed 4 in a house with only a 30k btu direct vent propane heater. they seem to be a nicely made quality product. could make acess to the electrical connections easier to get to but i would buy the 220v wall heater again
I had 4 of these installed in a resent upgrade of a townhouse. They are quiet and works very well. Paired them with wall programable thermostats so renters wouldn't have to manually operate the heaters. So far so good, heats well and keeps a constant heat. Would buy again.
*selected heaters only
Description
IN STOCK!
Introducing the brand new 3rd Generation Envi heater! The LE5022D is a direct replacement to the HW3022T & HW1022T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5022D Envi Heater is a 220volt hardwired whole room heater and has a built in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
BUY ENVI NOWWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
BUY ENVI NOW"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
BUY ENVI NOW