Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation (LE5012P)

(121 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

121 Reviews Hide Reviews Show Reviews

  • 5
    Envi plug in 3rd gen

    I now own 4 envi heaters, 3 3rd gen, 1 2nd gen. All plug in except one that is hardwired. I have a heat pump system that heats my home, 2 zones, upstairs and downstairs. The Envis helped me easily warm specific rooms and while doing so save money. We keep the house around 63 and just use the envis to warm the room we are in. Previously I was heating all 3700 sq ft at the same temperature, wasting a lot of electric. This has also been great to warm my office room which contains a pet reptile and helps to maintain the needed heat in that room 24/7 while wired to a thermostat.

    Jon

  • 5
    ENVI 120 V plug-in wall mounted heater

    Excellent engineering, low wattage, slim design, clean look, effortless installation, made in America.

    L. M. Klein

  • 5
    Environment 120 volt plug in wall heater

    Sleek, efficient, easy to use. Installed easily. Very happy with product.

    Kell

  • 5
    Envi 3rd generation wall heater

    Great product!! I have been looking for a wall heater for my daughter’s bedroom to supplement the heat because she’s in the lower level of the house and the temp runs a little cooler than the rest of the house. After a lot of research, I decided on the Envi wall heater and I’m super happy with my decision. Her room is 140 sq feet and heats the room with no problem even on the lowest setting. My favorite things about this heater are all the safety features, along with the low wattage of only 500 watts making it cost efficient and it sleek stylish design that fits well in any room. Highly recommended. Great American product.

    Jay

  • 5
    EHEAT, INC. ENVI 120V PLUG-IN ELECTRIC PANEL WALL HEATER - 3RD GENERATION (LE5012P)

    These are great! Low profile and it just blends in with the wall. Low energy consumption and keeps my bedroom warm. I bought another one for the bathroom and will get more as I can afford them as that the price of heating with oil makes this a no brainer. Only drawback is that the dial for setting the temperature is hard to read for old eyes.

    N Robinson

  • 5
    Love

    Best purchase I've made in a long time. Well worth the money. Keeps my sunroom toasty k the cold nights. No noticeable fluctuation in my energy bill thus far.

    Dayle

  • 5
    Love my envi heaters

    Just bought my 2nd envi heater. Works very well without taking up room on floor. Looks nice too!

    Beth Starrett

  • 5
    Review wall heater

    Wow, I'm impressed. I have been showing everyone that comes by. Lets see if you get more orders to Maine, It's getting cold up here!

    Jon Jost

  • 5
    Eheat plug in units

    I bought three for three different bedrooms rooms , amazing, just enough heat to keep us comfortable at night. Love’em !!!!

    Roger Turgeon

$179.95
made in USA
Shipping:
Free Shipping
Availability:
In Stock (Shipping Same Business Day)
Weight:
15.00 LBS
Shipping:
Calculated at Checkout
CutSheet:
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage:
500 Watts
Voltage:
120V, 4.17 Amps
Size:
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight:
10 lbs (shipped weight 15lbs)
Color:
Luxury White
Thermostat:
Manual
Cordset:
Plug-in
Adding to cart… The item has been added
Availability:
In Stock (Shipping Same Business Day)
  • pro-icon-1 FREE SHIPPING
  • pro-icon-2 30-DAY MONEYBACK GUARANTEE
  • pro-icon-3
    3-YEAR WARRANTY*

    *selected heaters only

Description

IN STOCK AND SHIPPING SAME BUSINESS DAY!

Introducing the brand new 3rd Generation Envi plug-in heater! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5012P Envi Heater is a 120volt plug-in whole room heater and has a built in thermostat.

FEATURES OF ENVI HEATER MODELS:

  • True Temperature-Controlling Thermostat. (Only models LE5012P, LE5012D and LE5022D)
  • Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
  • 500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
  • Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
  • Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
  • Conforms to UL & CSA (Canadian) safety standards (All models).
  • Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design.  Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater.  This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater.  The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

  • Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
  • Efficient - 100% Pure Convection Heating
  • Innovative - New Patented Stack Convection Technology
  • Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
  • Simple to install  - Installs in minutes, no drilling required
  • Slim - Just 2 inches thin
  • Stylish – Beautiful flowing curves compliment any room interior
  • Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
  • Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
  • American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
  • Heats Room Size – 130 to 150 square feet
  • Built in Thermostat - Better temperature control
  • Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
  • Industry Leading Warranty – 3 years
  • Easy to clean – smooth wipe clean surface
  • Cord Storage - Cordset can be stored inside the heater for a more attractive look.
  • Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.

Specifications

  • Brand

    eheat, Inc.
  • SKU

    LE5012P
  • ShortDescription

    The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
  • CutSheet

    https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
  • Wattage

    500 Watts
  • Voltage

    120V, 4.17 Amps
  • Size

    19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
  • Weight

    10 lbs (shipped weight 15lbs)
  • Color

    Luxury White
  • Thermostat

    Manual
  • Cordset

    Plug-in
CLICK HERE FOR SPEC SHEET
it-wotk-img

How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!

BUY ENVI NOW

See How Easy the Envi Wall Mounted Panel Heater is to Install Youself

Worried about paying to get a contractor to install your new Smart Envi unit? Think again. Jason Cameron explains how the Smart Envi is designed to be installed and set up at home by yourself in just XX minutes.

BUY ENVI NOW
heaterslider3 play-icon

Get Yours Today and Join

200,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."

left-img-ready

World's Number One Wall Mounted Panel Heater

Get yours today and join the 200,000+ Satisfied Customers

BUY ENVI NOW
  • logo-1
  • logo-2
  • logo-3
  • logo-4
  • logo-5
pdf-img Download this envi PDF Guide for free!

Videos Hide Videos Show Videos