They work well and we’re easy to install.
They are effectively heating the areas in which they were installed.
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
They are effectively heating the areas in which they were installed.
We installed ENVI Electric Panel Heaters in 3 upstairs bedrooms in our home. We use them for zone heating so we don't have to run the central gas furnace as much. We preheat the bedroom about an hour before bedtime and shut it off before going to sleep. They use about 500 watts each and are plugged into a normal 20amp home circuit. They are quiet with no fan and just operate as a convective heater. Stays worm for some time after they are shut off. Safe to the touch. Very happy with this purchase.
keeps bathroom warm
The heater was easy to install and does work well. It is currently in a room that is a bit larger than the recommended size but we have noticed that the room can maintain a better temperature than last year without it. Very happy with the purchase.
Our neighbor has six of these wall heaters around his house and has stopped using his HVAC for the most part. We have a corner of our kitchen that was too cold, The ENVI wall heater keeps it cozy, My wife thinks it looks good to boot. Problem solved.
Install easy good instructions
Purchased this little heater to have in a sunroom that doesn't get used much in the winter time. Heater was incredibly easy to set up and I love that it doesn't get hot to the touch. Overall, very happy with this product!
Great product and the perfect answer to our room heating need. Great price, fast , free shipping. MADE IN USA!
So far it's been the perfect addition to a room that's been most difficult to heat. A great addition to our home.
*selected heaters only
Description
IN STOCK AND SHIPPING SAME BUSINESS DAY!
Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
Order NowWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
Order Now"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
Order Now