Envi 220V
I started with one, ended getting four more and also recommending it to my cousin. These things work great and cost very little to run all year.
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
I started with one, ended getting four more and also recommending it to my cousin. These things work great and cost very little to run all year.
I now own 4 envi heaters, 3 3rd gen, 1 2nd gen. All plug in except one that is hardwired. I have a heat pump system that heats my home, 2 zones, upstairs and downstairs. The Envis helped me easily warm specific rooms and while doing so save money. We keep the house around 63 and just use the envis to warm the room we are in. Previously I was heating all 3700 sq ft at the same temperature, wasting a lot of electric. This has also been great to warm my office room which contains a pet reptile and helps to maintain the needed heat in that room 24/7 while wired to a thermostat.
Excellent engineering, low wattage, slim design, clean look, effortless installation, made in America.
Sleek, efficient, easy to use. Installed easily. Very happy with product.
Great product!! I have been looking for a wall heater for my daughter’s bedroom to supplement the heat because she’s in the lower level of the house and the temp runs a little cooler than the rest of the house. After a lot of research, I decided on the Envi wall heater and I’m super happy with my decision. Her room is 140 sq feet and heats the room with no problem even on the lowest setting. My favorite things about this heater are all the safety features, along with the low wattage of only 500 watts making it cost efficient and it sleek stylish design that fits well in any room. Highly recommended. Great American product.
These are great! Low profile and it just blends in with the wall. Low energy consumption and keeps my bedroom warm. I bought another one for the bathroom and will get more as I can afford them as that the price of heating with oil makes this a no brainer. Only drawback is that the dial for setting the temperature is hard to read for old eyes.
Best purchase I've made in a long time. Well worth the money. Keeps my sunroom toasty k the cold nights. No noticeable fluctuation in my energy bill thus far.
Just bought my 2nd envi heater. Works very well without taking up room on floor. Looks nice too!
Wow, I'm impressed. I have been showing everyone that comes by. Lets see if you get more orders to Maine, It's getting cold up here!
*selected heaters only
Description
IN STOCK AND SHIPPING SAME BUSINESS DAY!
Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
BUY ENVI NOWWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
BUY ENVI NOW"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
BUY ENVI NOW