Envi 120v Plug-in Electric Panel Wall Heater - 500 Watts - 3rd Gen (LE5012P)

(364 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

364 Reviews Hide Reviews Show Reviews

5
Envi 120 volt plug in heater

Love the heater, so much that it is the third one that we have purchased. We use In our porch and in our upstairs bedroom. They work wonderfully in our 12x14 foot rooms!

Mary von Fischer posted on 10th Nov 2022
5
LE5012P

I have purchased several Envis, but only gotten two installed so far. The first is working awesomely! I can feel the warmth as soon as I enter that room, and I only have it at about the midway point. I can gauge its temperature by my furnace thermostat which is nearby. It also helps my electric furnace to not run so much. I will be installing two more at this location, and they will be easy drywall installs. The 2d Envi I have installed was at an older location, on paneling. I will be installing one more there, also on paneling. It seems to be working fine, too. Even at the lowest setting, it is putting out consistent warmth. I will be turning it up a bit soon. I don't anticipate any problems with it. I am just a little cautious around older wiring, even though I think older homes are built far better than newer ones. My Envis were definitely a good buy, and I am very glad I found them!

Deb posted on 9th Nov 2022
5
Economical!

Purchased 4 and ran all 4 on lowest setting for October. Electric bill was 70 dollars more. house was always warm and toasty! Better than oil prices!

Bill Newell posted on 9th Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation (LE5012P)

Excellent heater! The installation instructions are super easy to follow, the heater's design is sleek and looks great, and the operation is flawless and easy to control.

Peter V. posted on 5th Nov 2022
5
eheat

bought just one to try for my 95 year old dad in his room and its not even up half way and his room and him are toasty and it is doing just what they said it would do ... Just got our 2nd one for my small office and I,m just glad something like this is out there and the best part its made in the USA .. this heater works even better then they stated ... Great customer service too

Doug Johnson posted on 3rd Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation

We've had the units for almost a month now. Easy to install, works as we expected and they look great. The wall above gets warm, but nothing worth mentioning, we let them run for 72 hours when they first arrived and I checked the walls above both of them, slightly warm, nothing more. I had researched almost everything on the market, these were the best reviewed, best quality and value. We definitely recommend this company to all who are looking for a room heater. Our room sizes are 12X12

Linda and John posted on 2nd Nov 2022
5
Envi 220V

I started with one, ended getting four more and also recommending it to my cousin. These things work great and cost very little to run all year.

Harold V posted on 2nd Nov 2022
5
Envi plug in 3rd gen

I now own 4 envi heaters, 3 3rd gen, 1 2nd gen. All plug in except one that is hardwired. I have a heat pump system that heats my home, 2 zones, upstairs and downstairs. The Envis helped me easily warm specific rooms and while doing so save money. We keep the house around 63 and just use the envis to warm the room we are in. Previously I was heating all 3700 sq ft at the same temperature, wasting a lot of electric. This has also been great to warm my office room which contains a pet reptile and helps to maintain the needed heat in that room 24/7 while wired to a thermostat.

Jon posted on 2nd Nov 2022
5
ENVI 120 V plug-in wall mounted heater

Excellent engineering, low wattage, slim design, clean look, effortless installation, made in America.

L. M. Klein posted on 30th Oct 2022

$179.95

made in USA

Shipping:

Free Shipping

UPC:: 860003321348
Availability:: In Stock (Shipping Same To Next Business Day)
Weight:: 15.00 LBS
Shipping:: Calculated at Checkout
CutSheet:: https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage:: 500 Watts
Size:: 19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight:: 10 lbs (shipped weight 15lbs)
Color:: Luxury White
Thermostat:: Manual
Cordset:: Plug-in (6.0 ft long)
Voltage:: 120V
Ampere:: 4.17 Amps
Condition:: New

New Envi Heaters come with a 3-year (36-month) manufacturer's warranty.

Add extended protection beyond 3 years for peace of mind.

Extend warranty by 1 year for $9.95

Extend warranty by 3 years for $19.95

No extended warranty

Quantity:

Current Stock: 10364 UNITS LEFT

Availability:

In Stock (Shipping Same To Next Business Day)

FREE SHIPPING
30-DAY MONEYBACK GUARANTEE
3-YEAR WARRANTY*
*selected heaters only

New heaters include a 3-year warranty, whereas factory refurbished units are covered for 6 months.

364 Reviews Hide Reviews Show Reviews

5
Envi 120 volt plug in heater

Love the heater, so much that it is the third one that we have purchased. We use In our porch and in our upstairs bedroom. They work wonderfully in our 12x14 foot rooms!

Mary von Fischer posted on 10th Nov 2022
5
LE5012P

I have purchased several Envis, but only gotten two installed so far. The first is working awesomely! I can feel the warmth as soon as I enter that room, and I only have it at about the midway point. I can gauge its temperature by my furnace thermostat which is nearby. It also helps my electric furnace to not run so much. I will be installing two more at this location, and they will be easy drywall installs. The 2d Envi I have installed was at an older location, on paneling. I will be installing one more there, also on paneling. It seems to be working fine, too. Even at the lowest setting, it is putting out consistent warmth. I will be turning it up a bit soon. I don't anticipate any problems with it. I am just a little cautious around older wiring, even though I think older homes are built far better than newer ones. My Envis were definitely a good buy, and I am very glad I found them!

Deb posted on 9th Nov 2022
5
Economical!

Purchased 4 and ran all 4 on lowest setting for October. Electric bill was 70 dollars more. house was always warm and toasty! Better than oil prices!

Bill Newell posted on 9th Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation (LE5012P)

Excellent heater! The installation instructions are super easy to follow, the heater's design is sleek and looks great, and the operation is flawless and easy to control.

Peter V. posted on 5th Nov 2022
5
eheat

bought just one to try for my 95 year old dad in his room and its not even up half way and his room and him are toasty and it is doing just what they said it would do ... Just got our 2nd one for my small office and I,m just glad something like this is out there and the best part its made in the USA .. this heater works even better then they stated ... Great customer service too

Doug Johnson posted on 3rd Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation

We've had the units for almost a month now. Easy to install, works as we expected and they look great. The wall above gets warm, but nothing worth mentioning, we let them run for 72 hours when they first arrived and I checked the walls above both of them, slightly warm, nothing more. I had researched almost everything on the market, these were the best reviewed, best quality and value. We definitely recommend this company to all who are looking for a room heater. Our room sizes are 12X12

Linda and John posted on 2nd Nov 2022
5
Envi 220V

I started with one, ended getting four more and also recommending it to my cousin. These things work great and cost very little to run all year.

Harold V posted on 2nd Nov 2022
5
Envi plug in 3rd gen

I now own 4 envi heaters, 3 3rd gen, 1 2nd gen. All plug in except one that is hardwired. I have a heat pump system that heats my home, 2 zones, upstairs and downstairs. The Envis helped me easily warm specific rooms and while doing so save money. We keep the house around 63 and just use the envis to warm the room we are in. Previously I was heating all 3700 sq ft at the same temperature, wasting a lot of electric. This has also been great to warm my office room which contains a pet reptile and helps to maintain the needed heat in that room 24/7 while wired to a thermostat.

Jon posted on 2nd Nov 2022
5
ENVI 120 V plug-in wall mounted heater

Excellent engineering, low wattage, slim design, clean look, effortless installation, made in America.

L. M. Klein posted on 30th Oct 2022

Specifications

Brand
Envi
SKU
LE5012P
ShortDescription
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
CutSheet
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage
500 Watts
Size
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight
10 lbs (shipped weight 15lbs)
Color
Luxury White
Thermostat
Manual
Cordset
Plug-in (6.0 ft long)
Voltage
120V
Ampere
4.17 Amps
Condition
New

CLICK HERE FOR SPEC SHEET

Description

IN STOCK AND SHIPPING SAME BUSINESS DAY!

Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.

FEATURES OF ENVI HEATER MODELS:

True Temperature-Controlling Thermostat. (Only models LE5012P, LE5012D and LE5022D)
Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
Conforms to UL & CSA (Canadian) safety standards (All models).
Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
Efficient - 100% Pure Convection Heating
Innovative - New Patented Stack Convection Technology
Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
Simple to install - Installs in minutes, no drilling required
Slim - Just 2 inches thin
Stylish – Beautiful flowing curves compliment any room interior
Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
Heats Room Size – 130 to 150 square feet
Built in Thermostat - Better temperature control
Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
Industry Leading Warranty – 3 years
Easy to clean – smooth wipe clean surface
Cord Storage - Cordset can be stored inside the heater for a more attractive look.
Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.

364 Reviews Hide Reviews Show Reviews

5
Envi 120 volt plug in heater

Love the heater, so much that it is the third one that we have purchased. We use In our porch and in our upstairs bedroom. They work wonderfully in our 12x14 foot rooms!

Mary von Fischer posted on 10th Nov 2022
5
LE5012P

I have purchased several Envis, but only gotten two installed so far. The first is working awesomely! I can feel the warmth as soon as I enter that room, and I only have it at about the midway point. I can gauge its temperature by my furnace thermostat which is nearby. It also helps my electric furnace to not run so much. I will be installing two more at this location, and they will be easy drywall installs. The 2d Envi I have installed was at an older location, on paneling. I will be installing one more there, also on paneling. It seems to be working fine, too. Even at the lowest setting, it is putting out consistent warmth. I will be turning it up a bit soon. I don't anticipate any problems with it. I am just a little cautious around older wiring, even though I think older homes are built far better than newer ones. My Envis were definitely a good buy, and I am very glad I found them!

Deb posted on 9th Nov 2022
5
Economical!

Purchased 4 and ran all 4 on lowest setting for October. Electric bill was 70 dollars more. house was always warm and toasty! Better than oil prices!

Bill Newell posted on 9th Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation (LE5012P)

Excellent heater! The installation instructions are super easy to follow, the heater's design is sleek and looks great, and the operation is flawless and easy to control.

Peter V. posted on 5th Nov 2022
5
eheat

bought just one to try for my 95 year old dad in his room and its not even up half way and his room and him are toasty and it is doing just what they said it would do ... Just got our 2nd one for my small office and I,m just glad something like this is out there and the best part its made in the USA .. this heater works even better then they stated ... Great customer service too

Doug Johnson posted on 3rd Nov 2022
5
Envi 120v Plug-in Electric Panel Wall Heater - 3rd Generation

We've had the units for almost a month now. Easy to install, works as we expected and they look great. The wall above gets warm, but nothing worth mentioning, we let them run for 72 hours when they first arrived and I checked the walls above both of them, slightly warm, nothing more. I had researched almost everything on the market, these were the best reviewed, best quality and value. We definitely recommend this company to all who are looking for a room heater. Our room sizes are 12X12

Linda and John posted on 2nd Nov 2022
5
Envi 220V

I started with one, ended getting four more and also recommending it to my cousin. These things work great and cost very little to run all year.

Harold V posted on 2nd Nov 2022
5
Envi plug in 3rd gen

I now own 4 envi heaters, 3 3rd gen, 1 2nd gen. All plug in except one that is hardwired. I have a heat pump system that heats my home, 2 zones, upstairs and downstairs. The Envis helped me easily warm specific rooms and while doing so save money. We keep the house around 63 and just use the envis to warm the room we are in. Previously I was heating all 3700 sq ft at the same temperature, wasting a lot of electric. This has also been great to warm my office room which contains a pet reptile and helps to maintain the needed heat in that room 24/7 while wired to a thermostat.

Jon posted on 2nd Nov 2022
5
ENVI 120 V plug-in wall mounted heater

Excellent engineering, low wattage, slim design, clean look, effortless installation, made in America.

L. M. Klein posted on 30th Oct 2022

Specifications

Brand
Envi
SKU
LE5012P
ShortDescription
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
CutSheet
https://www.eheat.com/content/upload/Envi-Gen3-Cut-Sheet-SG.pdf
Wattage
500 Watts
Size
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
Weight
10 lbs (shipped weight 15lbs)
Color
Luxury White
Thermostat
Manual
Cordset
Plug-in (6.0 ft long)
Voltage
120V
Ampere
4.17 Amps
Condition
New

CLICK HERE FOR SPEC SHEET

How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!

Order Now

See How Easy the Envi Wall Mounted Panel Heater is to Install Yourself

Worried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.

Order Now

Get Yours Today and Join

300,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."