Great product. Great customer service.
I purchased this the heat a cold basement level office. It works great! I set the desired temp and have it on a timer too. The room is now very comfortable. Their customer service is also excellent.
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
I purchased this the heat a cold basement level office. It works great! I set the desired temp and have it on a timer too. The room is now very comfortable. Their customer service is also excellent.
Love the unit
I have been trying to find a good heater to keep a shed around 50 deg F during the winter months in OH. This heater has worked great so far. Others varied in temperature too much and/or turned off (overheated?) after a few days. I am very pleased with this heater - I did get the plug in digital thermostat to allow for a known set point!
easiest heater to use and install and gets the job done
I’ve bought 8 of these units, 5 for my own use and 3 for customers. They are a great boost for a room on the edge of the heat zone in a house. They don’t have to be on high once a base heat level is obtained in a room. I’ve used them in a 2nd home were we heat it minimally and they do the trick, but it does take a while. They work great in bathrooms. All around they seem to be very efficient.
This is my second Envi heater, now in my most used day room. I will get a third so I can reduce onsite use of fossil fuels. These effective, warm heaters enable me to keep the oil burner set at 63 during the day and reduce expensive oil use. My electric bill has gone up only $10-15/month. Super easy to install in about 20 minutes.
We have three of the 2nd generation Envi and the 3rd generation has an improved, sloped top grille and an easy to use clear on/off switch.
I love this new heater. It gets very cold at night and the household heater would not warm my husband's room. Because his Parkinson's makes him a trip risk I cold not use a space heater in his room. This very quiet, unobtrusive heater is keeping the room at 72F with no fire risk at all.
I bought 4 heaters a few weeks ago. We have a house on the west coast and needed a quiet alternative to the standard in-wall heaters. These heaters are great, no noise, no smell, easy to install and sufficient for small spaces around 300 sq ft. I installed 3 in our living room and that is quite sufficient on the Oregon Coast.
*selected heaters only
Description
IN STOCK AND SHIPPING SAME BUSINESS DAY!
Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
BUY ENVI NOWWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
BUY ENVI NOW"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
BUY ENVI NOW