E-heater
Love these small, quiet, clean, aesthetically pleasing wall heaters. Planning to order a 3rd one.
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
Love these small, quiet, clean, aesthetically pleasing wall heaters. Planning to order a 3rd one.
This is the second Envi heater we've purchased for use in an 8'X12' bathroom. It's easy to install if you own a drill & a phillips screwdriver. With the thermostat set at about halfway, it keeps the room around 74 degrees. My wife likes it because of the sleek lines. I like it when I take a shower on a cold morning. There is no fan, so it is silent heat, which is nice in a small room.
This is a wonderful product. I am not a DYI person but the heater was really easy for me to install-if I can do it anyone can. And it works as well as described. I live where the temperature can go below 0 at night and this heater keeps my room very comfortable. It is totally silent also which is important to me. I recommend this product.
I have purchased 5 of these over the past few years. Each redesign is better than the previous, and it works super well! Crazy easy to install.
Quick and easy to install, works great. Put it in our laundry room.
This is our 6th heater and all of them were easy to mount and operate. Makes those cold area's nice and warm. I am waiting to see my energy bill but so far we are very pleased
Happy with my purchase. Not sure if it going to save me on my electric bill and I'll see you over the long run
these work GREATAND MADE IN USA,YEAH!
I like the ENVI 3rd Generation wall heater. It was a bit challenging to mount it evenly higher than the cardboard stencil, but all's well that ends well! It is helping heat the living room space where the propane fireplace isn't enough. Thanks!
*selected heaters only
Description
IN STOCK AND SHIPPING SAME BUSINESS DAY!
Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
Order NowWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
Order Now"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
Order Now