Sleek and efficient
I've been buying from eHeat since 2006 when the wall mounted heater was just a flat panel with no built-in thermostat control. Over the years, the product has greatly improved and just recently, I bought 3 new heaters.
The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
I've been buying from eHeat since 2006 when the wall mounted heater was just a flat panel with no built-in thermostat control. Over the years, the product has greatly improved and just recently, I bought 3 new heaters.
COMPLETELY quiet, low profile, low power consumption, effective for small spaces, or get multiple ones to heat your whole house! We have 4 and they have completely replaced the furnace!
This in my second 120 volt plug in from eheat. Perfect for my cold bathroom.
I recently purchased 2 new heaters for my new studio. This building is 12x24 with high ceilings and it is toasty warm inside! This is the second time I’ve bought and used these heaters over the years and I swear by them! I previously had a cabin in which the whole home was heated with these wall units and they worked perfect for many years. I highly recommend! These heaters are great and I always recommend them to others in the market for heaters.
Our new Envi heaters have an automatically dimming indicator light that let's you know if they are on but won't keep you up at night with glare. They have an easy to use dial control. They never get too hot for kids, pets or furnishings nearby. Our central heat has barely been needed. We are able to control the Envi units to be comfortable in different areas economically and with no noise.
Love these heaters. Wall mount is easy to install and hardly noticeable. I put mine on timers and set it and forget it. I have 3 of them and would buy more if I had more walls. Only bad thing is they will not heat a huge room as they are only 500watts. Perfect for bedroom. Also takes a while to heat up because no fan. I would rather have silent than have to listen to a fan running.
100% does what I want. Circulation effect is excellent in an area away from forced area run. Easy to install.
I have bought a handful of these Envi Heaters over the years and they never fail to disappoint. I have one in every bedroom and 3 in my living room/kitchen (a combined total area of 500+ sq ft). We live in the south, so it only gets to mid-high 20s in the winter, but even so, these little heaters are able to keep up. Excellent purchase and I will continue to recommend to friends and family!
*selected heaters only
Description
IN STOCK AND SHIPPING SAME BUSINESS DAY!
Introducing the brand new 3rd Generation Envi wall-mounted electric heater (120V)! The LE5012P is a direct replacement to the HH3012T & HH1012T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all-new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater, while preserving all of the best features of the earlier generations. The 3rd gen Envi electric 120v wall heater is efficient, silent, safe, easy to install, and virtually maintenance-free! The LE5012P Envi Heater is a 120 volt plug-in whole room heater and has a built-in thermostat.
FEATURES OF ENVI HEATER MODELS:
The Technology
The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.
Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design. Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater. This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater. The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.
The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!
What are the Benefits?
Please review our Return Policy before placing an order.
Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.
*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.
The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.
The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!
Order NowWorried about paying to get a contractor to install your new Envi wall heater? Think again. Jason Cameron explains how the Envi wall heater is designed to be installed and set up at home by yourself in just 10 minutes or less.
Order Now"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."
Get yours today and join the 300,000+ Satisfied Customers
Order Now