Envi 220v Hardwired Electric Panel Wall Heater - 3rd Generation (LE5022D)

(24 reviews) Write a Review

The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.

24 Reviews Hide Reviews Show Reviews

  • 5
    Even Heating, NO NOISE

    The bedroom USED to alternate between hot and cold. We're enjoying even heat with this unit. An additional plus, no noise!! Convenient. Efficient. Well worth every cent.

    Susan S

  • 5
    Well designed and easy to install

    I bought two of these heaters and found them the perfect fit for a medium sized bathroom and the grandkids playroom. Nice even warm temperatures.

    Jon H

  • 5
    Excellent Heater

    Replaced a Cadet heater in a bedroom. The Envi High-Efficiency Whole Room works great and doesn't make noises. Connected to existing thermostat and really does the job.

    Frank S.

  • 5
    Efficient heaters

    I replaced altogether 7 wall heaters with Envi wired-in heaters and am extremely pleased. They are silent, cool to touch, and use about a third of the power.

    C. LaBotz

  • 5
    Perfect for our kitchen

    Needed a little extra heat in our kitchen and this gave us what we needed.


  • 5
    Would buy again - amazing heater

    I now own five of these units. We recently remodeled our house and did away with the fuel oil furnace and replaced it with a ventless propane heater. I bought these Envi heaters for the bedrooms, bathrooms and laundry. They work great. It is a nice, even heat and each room can be individually controlled.


  • 5
    Great Quality Heater

    I bought 4 of the Envi 220v hardwired heaters for a 600 sq ft area of our basement that I was finishing. I was impressed by many factors of this product. Right out of the gate I received the heaters within 4 days of ordering them. Their build quality is great. It is so refreshing to purchase a product that is easy to install, everything lines up exactly as it is supposed to, it includes all the parts needed to install it (even a fool-proof template for attaching it to the wall), and most importantly is a not a disappointing cheaply made heater. The heaters have been installed and in operation for about a week now. The heaters do give off an odor when first turned on but that only lasted for about 6 hours as they are broken in (instructions tell you to initially run heaters full blast for 48+ hours). After the initial burn in the odor is gone and the heaters silently do the job. Oh yeah did I mention that they look great on the walls! This is a true quality Made in the USA heater and I would not hesitate to recommend them!! Kudos to the whole team at eheat! Thanks!!!

    Ralph V

  • 5
    Replacing Electric Baseboard Heating

    I bought 2 E Heat units to replace electric baseboard heaters. The are working so well that I will be ordering 3 more units to do away with the rest of the baseboard heaters. I am replacing my baseboard heating for more than 1 reason, first they are attractive and take up minimum room. Second the heat is quite and cleaner. Third is how much safer these units are.

    Jim R

  • 4
    A great alternative to the old electric register

    I'm am electrician for over 50 years now. I have been installing your envi heaters for a few years now, all my customers are pleased with the way they work and the cost savings every month on there utility bills, keep up the good work

    John D

made in USA
Free Shipping
In Stock
15.00 LBS
Calculated at Checkout
500 Watts
220V, 2.27 Amps
19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
10 lbs (shipped weight 15lbs)
Luxury White
Adding to cart… The item has been added
In Stock
  • pro-icon-1 FREE SHIPPING
  • pro-icon-3

    *selected heaters only



Introducing the brand new 3rd Generation Envi heater! The LE5022D is a direct replacement to the HW3022T & HW1022T models. The Envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have refreshed the Envi Heater with an all new, modernized design. The 3rd Gen Envi Heater has improved airflow, controls, and is an all-around better heater. The LE5022D Envi Heater is a 220volt hardwired whole room heater and has a built in thermostat.


  • True Temperature-Controlling Thermostat. (Only models LE5012PLE5012DLE5022D)
  • Wall-Sens(TM) Technology, safely cuts power to heater if it is removed from the wall. (All models)
  • 500 watts - low wattage convection heating that doesn't dry out the air, won't trip the breaker but is still powerful enough to heat a 130sf to 150sf rooms.
  • Convenient Cordset storage inside heater to tuck away untidy power cord. (only Plug-in models)
  • Hardwired models also available, approved for commercial installation. (LE5012D/LE5022D)
  • Conforms to UL & CSA (Canadian) safety standards (All models).
  • Available in Canada also. If you live in are in Canada, please click on www.eheat.com/canada to receive FREE SHIPPING to any location in Canada!

The Technology

The dual-stack convection technology featured in the Envi was born out of years of research and development to find a solution to effectively and safely heat a room using the smallest possible, amount of electrical heating energy.

Dozens of heating methods were evaluated to fine tune the Envi heater, but eventually the answer was found in a naturally occurring phenomena called the "stack effect". This provided the basis for and eventually we won a patent for the final Envi heater design.  Natural convection, fanless heating is enhanced by simulating multiple pathways, or “stacks,” inside the Envi heater.  This technology boosts the flow of cool air from the floor of a room, into the unit, and maximizes heat transfer out the top of the heater.  The resulting process creates a slow moving transfer of warm air around the room, effectively warming the occupants.

The result is a 100% pure convection, fanless heater that uses minimal energy but also effectively warms each room in a house or office - or any room or space for that matter!

What are the Benefits?

  • Economical - low wattage technology (only 500 watts). Costs as little as 4-5 cents an hour to run.
  • Efficient - 100% Pure Convection Heating
  • Innovative - New Patented Stack Convection Technology
  • Safe for children, seniors, and pets - Cool-to-the-touch (90°F), Wall-Sens(TM) technology and automatic thermal cutoff
  • Simple to install  - Installs in minutes, no drilling required
  • Slim - Just 2 inches thin
  • Stylish – Beautiful flowing curves compliment any room interior
  • Healthy - Fanless, non-forced air design that doesn't blow dust or allergens into the air and around the room.
  • Sleep friendly - Silent and auto dimming on/off power light in dark rooms, is helpful for light sleepers.
  • American Owned & Built – High Build Quality – ISO 9001 Quality Control Factory Certification
  • Heats Room Size – 130 to 150 square feet
  • Built in Thermostat - Better temperature control
  • Sturdy & Crack Resistant – high tech 21st Century durable materials will not crack or separate at the seams.
  • Industry Leading Warranty – 3 years
  • Easy to clean – smooth wipe clean surface
  • Cord Storage - Cordset can be stored inside the heater for a more attractive look.
  • Hardwired Approved - Hardwired models are certified and approved for permanent electrical installation under UL Safety Listing 2021. The Envi heater finally answers the need for a legal and safe, hardwired electric panel heater. (Models LE5012D, LE5022D)

Please review our Return Policy before placing an order.

Standard free shipping on all orders is NO SIGNATURE REQUIRED for delivery.

*Due to popular demand, stock levels may vary and will ship ASAP. Please contact us for a more accurate lead time.


  • Brand

    eheat, Inc.
  • SKU

  • ShortDescription

    The envi™ Wall-mounted Electric Panel Heater is one of the most efficient, stylish, and innovative space heaters ever developed. After 11 years we have finally refreshed the envi Heater with a more stylish look.
  • CutSheet

  • Wattage

    500 Watts
  • Voltage

    220V, 2.27 Amps
  • Size

    19.3 in. (W) x 2 in. (D) x 22.2 in. (H)
  • Weight

    10 lbs (shipped weight 15lbs)
  • Color

    Luxury White
  • Thermostat

  • Cordset


How It Works

The Envi Heater’s innovative dual-stack design was born out of years of research and development. The results revealed that the most effective way to heat a room with the least amount of energy is by heating the air in a room using 100% natural convection.

The Envi Heater’s inner chambers feature simulated “stacks” of varying height, which boost airflow through the unit to maximize heat transfer. The end result of this technology is enhanced airflow and safe air temperature, all without the use of a fan!


See How Easy the Envi Wall Mounted Panel Heater is to Install Youself

Worried about paying to get a contractor to install your new Smart Envi unit? Think again. Jason Cameron explains how the Smart Envi is designed to be installed and set up at home by yourself in just XX minutes.

heaterslider3 play-icon

Get Yours Today and Join

200,000+ Satisfied Customers

Greatest heater ever!!

"We love this slim profile, efficient heater. Installed it in a room that had no heat previously, and it works perfectly and very efficiently. Very easy to install and operate."


World's Number One Wall Mounted Panel Heater

Get yours today and join the 200,000+ Satisfied Customers

  • logo-1
  • logo-2
  • logo-3
  • logo-4
  • logo-5
pdf-img Download this envi PDF Guide for free!

Videos Hide Videos Show Videos